☰
Labmax Test adhesive indicator labels are double-sided self-adhesive labels available with a chemical indicator for ethylene oxide sterilization methods.
The lead-free chemical indicators in compliance with ISO 11140-1 provide an easy interpretation and will show an accurate indicator color change after a successful sterilization cycle.
Used with Label Gun, the labels can be printed with traceability providing data like sterilization and expiry date, autoclave and cycle no.
Double sided self-adhesive labelDesigned for ETONon-toxic and lead free process indicatorAccurate indicator color chanceConforms to ISO 11140-1We offer ETO (Ethylene-Oxide) Chemical Indicator designed to check Critical Parameters during Sterilization cycle in an ETO Machine (Automatic/ Semi-Automatic).
These are Class 5 Indicators used in CSSD with performance similar to a Biological Indicator.
Chemical Indicator conformation for to ISO 11140 - 1 Change of Color from (Orange to Yellow) after cycle is completed - easy to interpret They are placed inside the ETO Chamber in a sterilization pouch along with other Pack/ material It can detect problems such as Temperature being too low/ too high, Sterilization holding time being too short, low concentration of EO gas, insufficient penetration of EO gas in loads.
Non-Toxic/ Lead free indicators Helps in NABH Documentation for CSSD We offer Lot of Control Test (Batch Monitoring) Chemical Indicator Strips (Type Class 5) designed to check Sterilization conditions and parameters with each cycle/ batch of an ETO
These are Class 5 Indicators based upon Helix Type of Process Challenge Devices (PCD) in which an Integrating Chemical Indicator is placed. These are used in CSSD for identifying and certifying whether the complete Batch of Packs/ Trays has been properly Sterilized or not.
We can identify the non- condensable gases and Vacuum failures with PCD. This also simulates the Hollow instruments with narrow lumen which is important for CARDIAC/ NEURO Setups.
Helix PCD device is in accordance with EN 867-5 and ISO 11140-1 Integrating Indicator Strip conform to ISO 11140 - 1, Type 5 Indicator Strip is placed in the PCD device and placed inside the Autoclave/ ETO with the full loadOn Color change of full strip from White to Yellow (For ETO), certifies that adequate ETO Gas has penetrated and sterilization is proper
Only One Indicator in PCD needs to be placed in the complete Batch with any number of traysEasy documentation with sealed-adhesive indicator strip in CSSDNon-Toxic/ Lead free indicatorsHelps in NABH Documentation for CSSD